Caring For Common Types Of Commercial Roofing

Roof care is an important aspect of owning any type of building. Yet, it can be difficult to see the roof, which can make it easy to neglect. Unfortunately, this problem can be particularly severe for large enterprises, as these businesses may have expansive roofs that will be subjected to intense wear and tear. As a result, you will need to make sure that you are familiar with the steps that need to be followed to care for the various types of roofing that may be protecting your business.

Rubber

Rubber is a commonly used material for roofing, and it can be ideal for large, flat roofs. While this type of rubber will be extremely durable, it will also be prone to suffering wear and tear if it is not properly maintained. Ideally, maintaining your roof will involve having it professionally cleaned, sealed and inspected. These steps are necessary to minimize the wear and tear that water and sunlight exposure will cause. Also, having the roof inspected will allow minor splits and punctures to be repaired before water is able to seep into the interior of the rubber, as this may contribute to it becoming brittle.

Asphalt Shingles

Asphalt shingles are among the most common types of roofing material. This is largely due to their inexpensive cost and their durability. Yet, shingles can be extremely prone to suffering damage during storms. While many types of storm damage can be easily seen from the ground, minor damage can be much more difficult to notice. Not having the roof inspected after serious storms can allow substantial moisture damage to occur before repairs are made. Also, you will need to have the roof replaced every two or three decades, but only an experienced roof technician will be able to determine whether this work needs to be done.

Metal

Sheet metal can be another popular material for use in commercial roofs because it can be extremely cost effective for covering large buildings. To protect metal roofing against corrosion, you will need to have it sealed every couple of years. These seals will form a waterproof layer over the metal, which can stop corrosion from forming. When metal roofing develops punctures or severely corroded sections, it may be possible to replace these areas by cutting them out and installing a patch. However, the availability of this repair option will largely depend on the design of the roof, as well as the severity of the damage. In some instances, it may simply be more effective to replace the entire roof if the damage is severe enough.

For more information, contact a commercial roofing company, like East Texas Roof Works & Sheet Metal LLC.


Share